Tweco Victor Thermal Dynamics Power Module Upgrade Kit Bedienungsanleitung PDF herunterladen (Seite 2)

2 Manual 0-5326

Upgrade kit installation

NOTE

Most components not shown for clarity of installation. You will have to maneuver over, around and

through components to complete this installation. Disconnect all live power before starting procedure.

1. Remove side covers both the top and bottom on both sides of the machine.

Art # A-12323

2. Selectappropriateblankcenterchassisplate(s)toberemoved.

• fora200Aupgradeselectjustthecenterpanel

• fora300Aor400Aupgradeselectboththetopandthemiddle

NOTE

For a 400A upgrade from a 300A system, the center inverter will have to be removed.

3. Remove the 4 screws holding in the panel and rock outward before pulling.

Art # A-12324

1 2 3 4 5 6 7 ... 15 16

Keine Kommentare

Tweco Victor Thermal Dynamics Power Module Upgrade Kit Bedienungsanleitung Seite 2